100% Pass Your NS0-194 Exam Dumps at First Attempt with TestPDF
Penetration testers simulate NS0-194 exam PDF
NEW QUESTION 23
A customer receives the message shown below in their EMS logs.
Tue Jun 27 18:34:18 CEST
[netapp-ct1: cp_worker: wafl.cp.toolong:error]: Aggregate AG1_NTAP_PROD experienced a long CP.
Tue Jun 27 18:37:10 CEST
Which two data sources do you use to explain this message? (Choose two.)
- A. ONTAP System Manager
- B. mgwd.log
- C. Performance Archive
- D. Active IQ Unified Manager
Answer: A,C
NEW QUESTION 24
A disaster causes a FlexGroup volume to be unrecoverable, but it was protected by a SnapMirror relationship.
You solve the issue, and the source is operational. Now, you want to return to serving the data from the original source.
In this scenario, what do you do next?
- A. Perform a SnapMirror update.
- B. Delete the SnapMirror relationship.
- C. Initialize the SnapMirror relationship.
- D. Restore data from a backup copy.
Answer: C
NEW QUESTION 25
What are two reasons to use VLANs in a NetApp storage solution? (Choose two.)
- A. to isolate iSCSI traffic from NAS traffic
- B. to isolate UDP traffic from TCP traffic
- C. to isolate management traffic from other IP traffic
- D. to isolate FC traffic from other IP traffic
Answer: A,B
NEW QUESTION 26
You are asked to replicate 15 of 20 volumes and the network configuration of your storage virtual machine to your other data center.
In this scenario, which NetApp technology should you use?
- A. MetroCluster
- B. SVM DR
- C. SnapMirror Synchronous
- D. SVM peering
Answer: C
Explanation:
Explanation/Reference: https://www.netapp.com/pdf.html?item=/media/19369-tr-4832.pdf
NEW QUESTION 27
Which three transport protocols are used to deliver AutoSupport data to NetApp? (Choose three.)
- A. SSH
- B. HTTPS
- C. HTTP
- D. FTP
- E. SMTP
Answer: B,C,D
NEW QUESTION 28
When you replace a motherboard, which step will completely test the newly installed component?
- A. From the LOADER prompt, type boot_diags, then execute sldiag.
- B. From the LOADER prompt, type boot_ontap maint, then execute sldiag.
- C. From the LOADER prompt, execute sldiag.
- D. From ONTAP, execute sldiag.
Answer: B
NEW QUESTION 29
Referring to the exhibit.
A customer contacts you and asks for assistance in determining which ports can be used for a new broadcast domain on a clustered Data ONTAP 8.3.2 system.
The system is serving LUNs using the FC protocol and is in production.
However, for Ethernet traffic, it is not yet in production. The customer provides you the output of the network port show command.
Referring to the exhibit, which ports will be eligible to create a new broadcast domain without impacting production storage virtual machines (SVMs) serving FC LUNs?
- A. any port in the cluster broadcast domain on node1 and node2
- B. any port on node2
- C. any port on model
- D. any port in the Default broadcast domain on node1 and node2
Answer: D
NEW QUESTION 30
Your customer is concerned about SnapMirror transfers consuming too much network bandwidth. In this situation, which two SnapMirror features would help the customer? (Choose two.)
- A. network compression
- B. fan-out
- C. throttling
- D. fan-in
Answer: A,C
NEW QUESTION 31
During the deployment of a new system, the administrator has a business requirement for the data volumes to have file blocking and auditing.
Which feature would enable these capabilities?
- A. Fpolicy
- B. secd tracing
- C. Vscan
- D. log forwarding
Answer: A
NEW QUESTION 32 
In the AFF A200 shown in the exhibit, which port is a CNA port?
- A. |0|0|
- B. 0a
- C. e0c/0c
- D. e0a
Answer: C
Explanation:
Explanation/Reference: https://docs.netapp.com/platstor/topic/com.netapp.doc.hw-2700-install-setup/GUID-FE4BD3C8-
3DB4-438A-A5CE-FEEF74AE8BAF.html
NEW QUESTION 33
Which LIF role is used for SnapMirror traffic between two clusters?
- A. ~data~
- B. ~cluster~
- C. ~cluster-mgmt~
- D. ~intercluster~
Answer: D
NEW QUESTION 34
How many drive bays does a DS4246 shelf have?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Explanation/Reference: https://www.insight.com/en_US/shop/product/DS4246074812AQSR6/NETAPP/DS4246-0748-
12A-QS-R6/NetAppStorageShelfDS4246-Storageenclosure-24bays(SAS-2)-HDD4TBx12-rack-mountable-
4U/
NEW QUESTION 35
A customer is trying to enable NVMe and wants to use the FC adapters in the controllers but cannot enable the protocol.
Referring to the exhibit, what is causing the problem?
- A. There are no FC adapters installed with a max-speed of 32Gbps.
- B. There are no FC adapters installed with the speed set to 32Gbps.
- C. There are no FC adapters installed with a physical protocol set to NVMe.
- D. There are no FC adapters installed with a media type of NVMe.
Answer: C
NEW QUESTION 36
While troubleshooting client access issues to a CIFS share, you notice that the issue only occurs when the data LIF that the clients are accessing is on a specific node in the cluster.
In this scenario, which configuration should you review to determine why this issue is happening?
- A. export policies
- B. cluster health
- C. Kerberos
- D. share path
Answer: C
NEW QUESTION 37
You have an aggregate with 10 TB of free space. You create a 5 TB volume with space-guarantee set to none and fractional reserve set to 0. Inside the volume, you create a 100 GB space-reserved LUN.
In this scenario, how much free space is left in the aggregate?
- A. 10 TB
- B. 9.8 TB
- C. 5 TB
- D. 9.9 TB
Answer: D
NEW QUESTION 38
A FAS system that is backed by 7200 RPM drives is experiencing extremely latent writes and slow but less latent reads.
Referring to the exhibit, what are two reasons for this result? (Choose two.)
- A. Indirect I/O is causing most of the latency.
- B. The disks are latent.
- C. The controller is in back-to-back consistency points.
- D. NVRAM is too small for the controller.
Answer: B,C
NEW QUESTION 39
Which two SVMs would benefit from a load-sharing mirror? (Choose two.)
- A. An SVM that is configured for CIFS.
- B. An SVM that is configured for iSCSI.
- C. An SVM that is configured for FCP.
- D. An SVM that is configured for NFS.
Answer: A,D
NEW QUESTION 40
A storage administrator explains that when he enabled a virus scan on a clustered Data ONTAP 8.3.2 SVM "svm1" at 8:00 a.m. BST this morning, all CIFS share user access was impacted and customers reported receiving "access denied" errors. After the storage administrator disabled the virus scan on "svm1", user access was restored 30 minutes later.
Now the storage administrator wants to know the root cause of the problem. When you begin collecting event management system (EMS) logs, you discover the errors shown in the exhibit.
What was the root cause of the outage after the virus scan was enabled on "svm1"?
- A. The logged-in user (domain\\vscan_admin1) attempting to connect to the privileged ONTAP_ADMIN$ share is not found in the list of allowed users.
- B. Virus scan is enabled on the wrong SVM.
- C. Symantec Protection Engine is not one of our supported virus scan vendors.
- D. The IP address (172.16.16.74) attempting to connect to the privileged ONTAP_ADMIN$ share is not found in the list of allowed IP addresses.
Answer: B
NEW QUESTION 41
Referring to the exhibit.
A database administrator explains that the backup job scheduled to complete by 7:00 AM is not completing as fast as expected. You log in to theFAS3240 system and execute a few commands and obtain the output shown in the exhibit.
Which system resource would you eliminate as a eliminate as a problem based on the command output?
- A. network
- B. disk
- C. CPU
- D. memory
Answer: D
NEW QUESTION 42
You perform a security trace when troubleshooting a data access problem for a user. The results are shown in the exhibit.
What should you do to solve this issue?
- A. Add the user to the BUILTIN\Usersgroup.
- B. Add the user to the BUILTIN\power Usersgroup.
- C. Grant the user Read Attributes access to the path.
- D. Grant the user Execute access to the path.
Answer: C
Explanation:
Explanation/Reference: https://www.reddit.com/r/netapp/comments/dm90iv/change_ownership_failing/
NEW QUESTION 43
A FAS system that is backed by 7200 RPM drives is experiencing extremely latent writes and slow but less latent reads.
Referring to the exhibit, what are two reasons for this result? (Choose two.)
- A. Indirect I/O is causing most of the latency.
- B. The disks are latent.
- C. The controller is in back-to-back consistency points.
- D. NVRAM is too small for the controller.
Answer: B,C
NEW QUESTION 44
When a node fails over to its partner, what enables the up node to handle the uncommitted write requests?
- A. system memory
- B. NVRAM
- C. cluster network
- D. WAFL
Answer: B
NEW QUESTION 45
A user can read and write some files on an NFS volume, but the user is unable to read all of the files in the volume.
In this scenario, which command will help you troubleshoot this problem?
- A. vserver export-policy check-access
- B. security login create
- C. security audit show
- D. vserver security trace filter create
Answer: D
NEW QUESTION 46
......
All NS0-194 Dumps and Training Courses: https://www.testpdf.com/NS0-194-exam-braindumps.html
