2023 HPE0-J58 Premium Files Test pdf - Free Dumps Collection
Get ready to pass the HPE0-J58 Exam right now using our HPE Master ASE Exam Package
NEW QUESTION 37
A customer has two sites. The link between sites is Fibre Channel, and the distance between sites is less than
1km. The link latencies are within HPE recommended tolerances.
The customer asks you to design a Peer Persistent solution using HPE servers running physical Windows
2016 servers and HPE 3PAR storage.
What are characteristics of the Quorum Witness? (Select two.)
- A. A Peer Persistence Quorum Witness is required for normal HPE 3PAR Peer Persistence operation
- B. A virtual implementation of the Peer Persistence Quorum Witness is required on a third site
- C. The Quorum Witness initiates the fail-over, passing control to the standby array
- D. Quorum Witness becomes relevant only during 3PAR Peer Persistence failover
- E. A physical implementation of the Peer Persistence Quorum Witness is required on a third site
Answer: A,B
NEW QUESTION 38
A customer needs to a multi-site environment where the entire inter-site transmission will be encrypted. Which products support this feature without additional licenses? (Select two.)
- A. HPE Nimble arrays with SmartReplicate (remote replication)
- B. HPE StoreOnce hardware appliance
- C. any B-series 16Gb SAN Switch
- D. HPE StoreOnce VSA
- E. HPE 3PAR
Answer: B,C
NEW QUESTION 39
A customer is monitoring an existing HPE 3PAR array, which is doing synchronous replication to a remote site. The customer notices that controller utilization regularly exceeds 60% on all nodes. An HPE 3AR OS upgrade to 3.3.1 MU2 is planned in the near future to support compression on the array.
What should you inform the customer before performing the upgrade?
- A. Performance cannot he guaranteed during the upgrade.
- B. Enabling compression requires a backup and restore of all data
- C. Performing the upgrade will need to be done in the offline mode
- D. Enabling compression requires SED capable SSDs In the array.
Answer: A
NEW QUESTION 40
Refer to the exhibit.
A customer is planning a new compute cluster. They require business continuity, and they need automatic transparent failover between sites with an RPO of 0.
You propose HPE 3PAR 9450 arrays at each site. The displayed Bill of Materials (BOM) shows the hardware and software components for one site.
What must be added to the BOM at each site to build the solution?
- A. one HPE 3PAR All-inclusive Multi-system Software Suite
- B. one HPE 3PAR Policy Manager Software license
- C. four additional HPE 3PAR 9000 4-port 16Gb Fiber Channel Host Bus Adapters
- D. two additional HPE 3PAR 9000 2-port 10Gb Ethernet Host Bus Adapters
Answer: B
NEW QUESTION 41
A customer's primary and OR datacenter are over 700 km apart. The customer wants to minimize data loss during a OR failover, but is worried about the potential production IO performance impact of replicating their data.
You recommend HPE 3PAR asynchronous replication.
Which key factor should you explain about the proposed solution?
- A. Most writes are acknowledged as soon as they are performed on both the primary and secondary storage array
- B. All writes are written to the target
- C. Host write latencies win increase
- D. Host writes are acknowledged as soon as they are performed on the primary storage array
Answer: D
NEW QUESTION 42
An HPE Nimble customer needs to consolidate storage and scale performance. They are looking to purchase additional hardware to meet these requirements.
What is the best solution to offer this customer?
- A. Use multiple single-array storage pools
- B. Add additional HBAs in the arrays
- C. Use multi-array storage pools
- D. Add additional SSDs to the cache
Answer: A
NEW QUESTION 43
Refer to the exhibit.
A customer is considering a new HPE 3PAR for the purpose of implementing deduplication and compression.
Based on the output returned from the NinjaCrawler tool, what do you know about the customer data?
- A. This data has a video data workload profile
- B. This data is a good candidate for HPE 3PAR deduplication
- C. This data is from an HP-UX system
- D. This data has a block size which is not optimal for HPE 3PAR
Answer: B
NEW QUESTION 44
A customer requires a 5 PB object storage solution across two sites.
Which storage solution meets this requirement1?
- A. HPE 3PAR 8450 d-node with File Persona
- B. HPE Nimble StorageAF 80 4-array group
- C. HPE with Scality RING on Apollo 4000 servers
- D. HPE SimpliVity 380. 16 node configuration
Answer: B
NEW QUESTION 45
A customer has an HPE Nimble Storage array. They plan to add a second HPE Nimble Storage array to their existing group.
What is the expected write behavior to a volume once the new array is added to the same pool as the existing array?
- A. Data will immediately start to alternate writes between the two arrays
- B. Data will be written to the new array until it is the same percent full as the original array
- C. Data will be stripped and automatically re-balanced across the two arrays
- D. Data will continue to write to the first array until there is 40% free space available, and then alternate writes between the two arrays
Answer: C
NEW QUESTION 46
Match the HPE resource to Its source location.
Answer:
Explanation:
NEW QUESTION 47
A customer deployed an HPE 3PAR 8200 and an HPE 3PAR 8400 array Peer persistence is configured between them All remote copy links are lost, Out connection to the Quorum witness is maintained by Doth arrays.
Immediately after the remote copy links are restored, the customer reports they cannot perform a manual switchover for maintenance in SSMC
What is causing this issue'
- A. Peer Persistence is designed for Automatic Transparent Failover and must be disabled to perform a manual switchover.
- B. A manual switchover cannot be performed until the volumes are resynced.
- C. Manual switchover is not supported between arrays of different models
- D. Manual switchover cannot be performed if the arrays are running different firmware versions
Answer: A
NEW QUESTION 48
You are proposing a replication solution to a customer. A competitor offers a solution based on storage virtualization appliances.
What should you stress about an HPE 3PAR replication solution in regard to the competitor's proposal?
- A. It offers superior virtualization of 3rd party storage arrays
- B. It offers best-in-class backup and restore capabilities
- C. It will add on-the-fly encryption and compression to data being replicated outside the customer's DC
- D. It means less overhead for management and monitoring
Answer: D
NEW QUESTION 49
A customer has recently acquired another company that is located less than 3 km from their current main
location. Both locations use HPE B-Series products in their storage environment.
The customer needs to merge the 2 locations together while still using the current WAN and networking
infrastructure at both locations. They need to keep their initial cost down until they are able to redesign both networking infrastructures.
Which protocol should be incorporated when providing a proposal to meet the customer needs?
- A. CWDM
- B. ISCSI
- C. DWDM
- D. FCIP
Answer: A
NEW QUESTION 50
How does the HPE Nimble Storage product strategy support a customer's investment protection requirements
for today and the future?
- A. by supporting the repurposing of obsolete array controllers as high-density servers
- B. by supporting replication between current and previous-generation array models
- C. by supporting the implementation of third party cache, spinning media, and flash media
- D. by supporting replication with arrays from other vendors
Answer: C
NEW QUESTION 51
A customer wants to replace an EMC storage array. You want to provide as much Information about the EMC configuration as possible to propose an HPE 3PAR or HPE Nimble Storage array.
Which HPE tool will meet your needs?
- A. HPE NinjaPiotecled-
- B. HPE Storage Sizer
- C. HPE SAF-Collect
- D. HPE Ninja Stars for 3PAR
Answer: C
NEW QUESTION 52
A customer needs a solution that will scale out with multiple arrays for replication and will guarantee increased IOPS over the life of the solution.
Which HPE program should you leverage in your solution to help meet the customer's requirements?
- A. HPE Get 6-Nines Guarantee
- B. HPE Nimble Timeless storage
- C. HPE Store More Guarantee
- D. HPE SimpliVity HyperGuarantee
Answer: B
NEW QUESTION 53
A customer needs a new replication solution that makes use of capacity efficiency technologies, even though data is being replicated to another array.
You have been developing a solution that includes two HPE 3PAR arrays. What should you emphasize in your proposal?
- A. Compression technologies increase the effective bandwidth being available for replication and disaster recovery
- B. The arrays share deduplication hash tables, and the target array only needs to compress the replicated data from the source array
- C. Thin Technologies, deduplication, and compression can be used on both sides with volumes in Remote Copy groups
- D. The data being replicated will travel the connection between the arrays fully compressed and deduplicated
Answer: D
NEW QUESTION 54
What must be considered Alien defining a data compliance strategy?
- A. GDPR applies to all companies processing personal data for people residing in the EU. but only if that company is physically located or based in the EU.
- B. Backup data must be stored in multiple offsite locations and these different data centers must be in three geographically distinct regions
- C. in the united States, company boards, management personnel, and accounting firms must comply with HIPPA regulations regardless of location and financial records must be maintained for seven years.
- D. Organizations must meet the compliance requirements of each country In which they operate.
Answer: A
NEW QUESTION 55
A customer has two HPE Nimble arrays that are replication partners. The replication schedule is set to every hour After the replication completed at 1 00 pm. the array at the primary site suffers a power failure at 1:30(pm Applications were failed over successfully by me administrators, and production continued on the secondary site array as designed Power was restored to the primary site array at 3:00 pm When the administrator restores the replication to the primary site, which data Is sent to the primary array?
- A. all data that was changed al the secondary site from the last snapshot at 1:00 pm
- B. all data at the secondary site from the first snapshot on the array
- C. the data that was changed between 1:30 pm and 3:00 pm at the secondary site
- D. the data '"at was changed between 3:00 pm and the end of the snapshot replication
Answer: C
NEW QUESTION 56
A customer has an HPE Nimble Storage array. They plan to add a second HPE Nimble Storage array to their existing group.
What is the expected write behavior to a volume once the new array is added to the same pool as the existing array?
- A. Data will immediately start to alternate writes between the two arrays
- B. Data will be written to the new array until it is the same percent full as the original array
- C. Data will be stripped and automatically re-balanced across the two arrays
- D. Data will continue to write to the first array until there is 40% free space available, and then alternate writes between the two arrays
Answer: B
NEW QUESTION 57
A customer requests a proposal for two HPE 3PAR arrays using asynchronous periodic replication. The customer has two data centers, and the current bandwidth available for replication between the data centers is
200 Mb/s.
The customer is replicating 30TB, and the change rate is 3% in 24 hours. The customer wants to achieve an RPO of 10 minutes.
Which statement about bandwidth and replication is true for the customer requirements?
- A. The bandwidth will have to be increased, and replication must happen every 5 minutes
- B. The bandwidth is sufficient, and replication must happen every 5 minutes
- C. The bandwidth is sufficient, and replication must happen every 10 minutes
- D. The bandwidth will have to be increased, and replication must happen every 10 minutes
Answer: A
Explanation:
Explanation
NEW QUESTION 58
......
Master 2023 Latest The Questions HPE Master ASE and Pass HPE0-J58 Real Exam!: https://www.testpdf.com/HPE0-J58-exam-braindumps.html
A fully updated 2023 HPE0-J58 Exam Dumps exam guide from training expert TestPDF: https://drive.google.com/open?id=1algttOQrFObw0l92Ev9RoNbDEqDfoxSv
