Actual NACE-CIP2-001 Exam Recently Updated Questions with Free Demo
Free NACE NACE-CIP2-001 Exam Questions Self-Assess Preparation
NACE-CIP2-001 (Coating Inspector Level 2) Exam is a widely recognized assessment in the field of corrosion prevention and control. NACE-CIP2-001 exam is designed to test the proficiency of professionals in the coating industry and validate their knowledge in the inspection, evaluation, and documentation of surface preparation and coating application. Successful completion of NACE-CIP2-001 exam grants the Coating Inspector Level 2 certification, which is highly valued in the industry.
NACE-CIP2-001 certification exam is a valuable and prestigious certification that can help professionals in the coating inspection industry take their careers to the next level. With its rigorous testing and comprehensive coverage of coating inspection principles and techniques, this certification is a must-have for anyone looking to excel in this field.
NEW QUESTION # 26
Which product, when closely inspected has a green or red layer of fusion bonded epoxy (FBE) that is visible directly on the steel?
- A. Fusion Bonded Epoxy
- B. 2-Layer Polyethylene (PE)
- C. 3-Layer Polyethylene (PE)
- D. Coal Tar Enamel
Answer: C
NEW QUESTION # 27
A single component water borne acrylic coating cures by:
- A. Oxidation
- B. Co-Reaction
- C. Coalescence
- D. Solvent Evaporation
Answer: C
NEW QUESTION # 28
The solvent sensitivity/solvent wipe test (ASTM D4752) is used to determine the cure of
- A. urethanes.
- B. inorganic zincs.
- C. epoxies.
- D. powder coatings.
Answer: B
NEW QUESTION # 29
You are working as the only in-house NACE Level 2 Inspector in a shop setting when an independent 3 rd party NACE Level 3 Inspector, representing the owner, presents you with a copy of a Non Conformance Report (NCR) he has written for a NACE2/SSPC SP 10 centrifugal blast which you had previously approved.
Your FIRST preferred course of action is to:
- A. Consult your supervisor
- B. Review the NCR with the other Inspector
- C. Verbally challenge the NCR
- D. Request a re-blast of the item in question
Answer: A
NEW QUESTION # 30
Surface preparation of concrete is performed using:
- A. Methods that are the same as wood
- B. Methods that are exactly the same as steel
- C. Methods that have been modified for concrete
- D. Methods that are completely different to steel
Answer: C
NEW QUESTION # 31
When measuring the Dry Film Thickness Of liquid coatings applied to galvanized ferrous substrates the most commonly used instrument is the:
- A. Magnetic Gauge
- B. Tooke Gauge
- C. Eddy Current Gauge
- D. Ultra Sonic DFT Gauge
Answer: B
NEW QUESTION # 32
An Inspection and Test Plan is required when:
- A. It is always required
- B. When the Owner specifies one
- C. When the Coating Applicator requests one
- D. When the Inspector requests one
Answer: A
NEW QUESTION # 33
Ideally, documentation requirements should be defined:
- A. By the contractor
- B. By the inspector
- C. In the specification
- D. At the pre-job conference
Answer: C
NEW QUESTION # 34
When environmental enclosures are being used an inspector needs to be concerned about:
- A. Air changes
- B. a), b), and c)
- C. Lighting
- D. Structural integrity
Answer: B
NEW QUESTION # 35
You should bulk store coatings containing isocyanates
- A. in a heated warehouse.
- B. in a well ventilated area separate from the work place.
- C. wherever it is convenient
- D. in a refrigerated warehouses
Answer: B
NEW QUESTION # 36
Which concrete smoothing technique involves scrubbing a mixture of cement mortar over the concrete surface using ai cement sack, gunny sack, or sponge rubber float?
- A. Stoning
- B. Sacking
- C. Acid etching
- D. High-pressure water washing
Answer: B
NEW QUESTION # 37
From a corrosion perspective, the main difference between Ferrous and Non-Ferrous Metals is:
- A. Safety
- B. Appearance
- C. Iron content
- D. Cost
Answer: C
NEW QUESTION # 38
Steel shot grit contaminated with oil or grease used in a cetrifugal blast cleaning should be
- A. disposed of properly.
- B. run through the air wash separator.
- C. mixed with uncontaminated abrasive
- D. washed with clean potable water prior to Use.
Answer: A
NEW QUESTION # 39
External coatings applied to buried pipelines are generally tested for:
- A. Solvent resistance
- B. Cathodic disbondment
- C. Gloss level
- D. Chalking resistance
Answer: B
NEW QUESTION # 40
When a coating is expected to be exposed to temperatures above 93C (200 F) the best choice would be:
- A. Latex
- B. Inorganic Coatings
- C. Polyurea
- D. Organic coatings
Answer: B
NEW QUESTION # 41
On pipelines, which coating is identifiable by its distinct colors, usually light blue, green, or grey?
- A. Heat-shrink sleeves
- B. Liquid epoxies
- C. Concrete
- D. Coal Tar Enamel
Answer: B
NEW QUESTION # 42
Coating Surveys are legally required:
- A. On water tanks and potable water pipelines
- B. On high pressure gas lines and fireproofed structures
- C. On food and beverage vessels and can linings
- D. On commercial marine vessels and offshore platforms
Answer: D
NEW QUESTION # 43
Generally for safety considerations, waterjetting hose connections use
- A. a whip-lock device.
- B. an oil/water separator.
- C. filters.
- D. a long wand.
Answer: A
NEW QUESTION # 44
When performing an adhesion test in accordance with ASTM D 3359 where the Dry Film Thickness is approximately 10 mils, the Inspector should use:
- A. Method B - X cut
- B. Method B - Cross Hatch
- C. Method A - X Cut
- D. Method A - Cross Hatch
Answer: C
NEW QUESTION # 45
NACE Level 2 Inspectors have been authorized to perform:
- A. Visual inspection only
- B. All types of inspection without supervision
- C. Visual inspection, Non-Destructive and Destructive testing
- D. Visual inspection and Non-destructive testing
Answer: C
NEW QUESTION # 46
The coating applicator has ignored a enface preparation hold point and applied coating over the surface without a sign off from you as the inspector.
Your FIRST preferred course of action is to:
- A. Stop the job
- B. Advise the Owner and write a Non-Conformance report
- C. Ignore the situation
- D. Require the Applicator to remove the coating
Answer: D
NEW QUESTION # 47
You are the NACE Level 2 Coating Inspector where SSPC PA 2 has been specified with an additional requirement that no individual gauge reading shall be below a certain value.
As this is not part of the standard you should:
- A. Enforce the additional requirement
- B. Ignore the additional requirement
- C. Request clarification from the specifier
- D. Call your supervisor
Answer: A
NEW QUESTION # 48
You are the NACE Level 2 Inspector with the final responsibility to prepare the final report for a very large structural steel shop project which has gone very well. It is due next week. The work has been ongoing for two years and several NACE Level 1 Inspectors have worked under your supervision throughout the project. You find you are missing one week of daily reports for the night shift from the very beginning of the project and despite your best efforts they are cannot found.
You FIRST preferred course of action is to:
- A. Re-create the reports as not much was going on during night shift anyway
- B. Do not complete your report until they can be found
- C. Use creative writing to cover over the fact they are missing
- D. Plainly state in your report that they are missing
Answer: D
NEW QUESTION # 49
As a NACE Level 2 Inspector, NACE clearly indicates that you ate qualified to independently produce final documentation for a shop project.
- A. False
- B. True
Answer: B
NEW QUESTION # 50
......
Achieving NACE-CIP2-001 certification is a significant achievement for coating inspectors, as it demonstrates their knowledge, skills, and commitment to professional development. Coating Inspector Level 2 certification is recognized and respected by employers and industry professionals worldwide, and it can open up new career opportunities and advancement possibilities for those who hold it.
NACE-CIP2-001 Free Sample Questions to Practice One Year Update: https://www.testpdf.com/NACE-CIP2-001-exam-braindumps.html
Download NACE-CIP2-001 exam with NACE NACE-CIP2-001 Real Exam Questions: https://drive.google.com/open?id=1YtYhThqGxRtIGMYzdK1knMi3O6uTV_00
