BEST Verified IBM S1000-007 Exam Questions (2024)
The Best Practice Test Preparation for the S1000-007 Certification Exam
IBM S1000-007 certification exam is suitable for IT professionals who are working in enterprise-level organizations and managing AIX v7 systems. IBM AIX v7 Administrator Specialty certification is also useful for professionals who are looking to switch their career to AIX v7 administration. IBM AIX v7 Administrator Specialty certification exam validates the candidate’s ability to manage and maintain AIX v7 systems and enhances their credibility and marketability in the IT industry.
NEW QUESTION # 16
Based on the output from the lparstat command, how many logical processors are configured in the partition?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 17
An administrator has configured NFS export in the /etc/exports file. Based on the following output, with which permissions has the /tmp directory been exported?
- A. no permissions
- B. write-only permissions
- C. read-only permissions
- D. read-write permissions
Answer: D
NEW QUESTION # 18
A system administrator has noticed that static routes are missing after rebooting a system. What is the most likely reason for this?
- A. The administrator has failed to run the cfgmgr command before rebooting the systems.
- B. The administrator has failed to configure the routes with the route add command.
- C. The administrator has failed to configure the routes in the inet0 device with the chdev command.
- D. The administrator has failed to configure the routes in the lo0 device with the chdev command.
Answer: C
NEW QUESTION # 19
One morning the application owner needed to urgently transfer some files using FTP from Development Dev_DB_Server to the production server - DB_Server, but is receiving the following error:
connect: Connection refused
Note: DB_Server-cannot be shutdown during business hours.
Checking the setup of DB_Serrver, the administrator finds the following entries in /etc/inetd.conf
The administrator also, finds the file /etc/ftpaccess . ctl doesn't exit.
Which two methods can be used to allow files to be transferred to DB Server using FTP?
- A. On DBServer run command startsrc -s ftpd and create /etc/ftpaccess-ctl with line "allow: *".
- B. On DBServer run the command /usr/sbin/f tpd.
- C. On DB_Server uncomment line starting with "#f tp" in /etc/inetd.conf and reboot.
- D. On DB_Server uncomment line starting with "#ftp" and run refresh -s inetd.
- E. On DB_Server run command startsrc -t ftp.
Answer: C,D
NEW QUESTION # 20
The administrator of an AIX NIM client system has accidentally removed the /etc/niminfo file. Which method is used to rebuild the /etc/niminfo file?
- A. Use the niminit command on the AIX client system to rebuild the /etc/niminfo file.
- B. Use the nimclient command on the AIX client system to rebuild the /etc/niminfo file.
- C. Use the nimclient command to restore the /etc/niminfo file from the most recent mksysb backup image.
- D. Use the rep command on the AIX client system to copy the /etc/niminfo file from the NIM master.
Answer: C
NEW QUESTION # 21
What AIX feature will allow data to be mirrored to a remote site?
- A. Asynchronous Dispersed Logical Volumes
- B. Remote Volume Groups
- C. Geographic Logical Volume Manager
- D. Mirror Pools
Answer: C
Explanation:
Geographic Logical Volume Manager (GLVM) is an AIX feature that allows data to be mirrored to a remote site [1][2], enabling disaster recovery and improved data availability. GLVM creates a single, unified view of the data across multiple sites, allowing the data to be managed and accessed as if it was all stored in one location. Reference: IBM AIX v7 Administrator Specialty Study Guide, page 546.
NEW QUESTION # 22
A customer runs smit on the AIX command line and receives the message below:
1800-005 SMIT requires a minimum of 24 line by 80 column output display.
What can be done to resolve the error?
- A. Change their DISPLAY environment variable.
- B. Make sure they are running as the root user.
- C. Resize their window.
- D. Set the TERM variable to smit.
Answer: C
Explanation:
The root user is not required to run SMIT, and the size of the window is the only factor that determines the minimum output display requirements. According to the IBM AIX v7 Administrator Specialty Study Guide (page 9-3), SMIT requires 24 lines and 80 columns for the output display for successful execution.
NEW QUESTION # 23
Which two additional commands should an AIX V7.2 administrator run after mirroring the rootvg with mirrorvgcommand?
- A. varyonvg
- B. synclvodro
- C. bosboot
- D. bootlist
- E. reboot
Answer: C,D
NEW QUESTION # 24
A customer calls to complain about slow workload performance but offers no additional details. What should the administrator do next?
- A. Add 10% more memory by DLPAR operation
- B. Increase CPU entitlement by 10%
- C. Ask the caller for additional details.
- D. Add two more virtual CPUs by DLPAR operation.
Answer: A
NEW QUESTION # 25
An administrator has configured NFS export in the /etc/exports file. Based on the following output, with which permissions has the /tmp directory been exported?
- A. read-only permissions
- B. read-write permissions
- C. no permissions
- D. write-only permissions
Answer: A
NEW QUESTION # 26
An AIX administrator is struggling with installing RPM packages. When they try to install a package, errors appear that there are prerequisite RPMs that also need to be installed. Which tool can be used to simplify resolving these dependencies?
- A. yum
- B. dpkg
- C. rpm
- D. installp
Answer: D
Explanation:
Installp is a command-line package management tool that is used in the AIX operating system to install, remove, and manage software packages. It simplifies the installation of RPM packages by automatically resolving any prerequisite dependencies and installing them before the main RPM package. This ensures that any prerequisites are installed and configured correctly before the main package is installed, reducing the time it takes to resolve installation issues. Reference: IBM AIX v7 Administrator Specialty Study Guide (page 9-10).
NEW QUESTION # 27
A customer calls to complain about slow workload performance but offers no additional details. What should the administrator do next?
- A. Add 10% more memory by DLPAR operation
- B. Increase CPU entitlement by 10%
- C. Ask the caller for additional details.
- D. Add two more virtual CPUs by DLPAR operation.
Answer: C
Explanation:
When a customer calls with a complaint about slow workload performance, it is important to ask for additional details to help pinpoint the source of the issue. This could include details such as which application or process is running slowly, what errors are appearing, how long the issue has been occurring, etc. Having this information will help the administrator to determine the cause of the problem and determine the best course of action. Reference: IBM AIX v7 Administrator Specialty Study Guide (page 5-29).
NEW QUESTION # 28
The lspv and Iquerypv commands show a different PVID for an hdisk. How is this possible?
- A. lspv is incorrectly hashing the UDID of the disk.
- B. The system has the wrong version of the lspv command installed.
- C. lspv is querying a disk at a different location.
- D. lspv shows the contents of the ODM.
Answer: D
Explanation:
The lspv command displays information about physical volumes on the system, and it retrieves the information from the Object Data Manager (ODM). The ODM is the database that stores information about the system's hardware configuration, including the PVID of each disk. The Iquerypv command directly queries the disk for its PVID, and is therefore able to display the correct PVID. Reference: IBM AIX v7 Administrator Specialty Study Guide, page 546.
NEW QUESTION # 29
While a system administrator is checking the TCP/IP connectivity between two systems with the traceroute command, the administrator found Fragmentation required messages in the traceroute output.
What is the likely reason for these messages?
- A. Same MTU sizes between the source and target systems. The source and target systems are using Jumbo Frames. The LPARs are using the same Virtual Switch (vSwitch) Network.
- B. Different MTU sizes between the source and target systems. The source system is using Jumbo Frames and the target is using the default MTU size.
- C. The TCP buffers in the router gateway are exhausted. The source and target system are having TCP/IP communication problems.
- D. The TCP buffers between the source and the target systems are exhausted. The source and target systems are using virtual ethernet adapters.
Answer: B
NEW QUESTION # 30
Which statement is true regarding the snap command?
- A. It collects performance related data.
- B. All options are enabled by default.
- C. The data must be stored in /tmp.
- D. By default, it will check there is enough space where the data is to be stored.
Answer: D
Explanation:
"The command to limit root user access to only members of the group called system is chadmin group=system root. This command will set the primary group of the root user to the system group, thereby limiting root user access to only members of that group. This command can be used to set any user's primary group, not just root." The source of this information is the IBM AIX v7 Administrator Specialty Study Guide.
NEW QUESTION # 31
A customer added paging space and needs to activate it automatically after the next reboot. Which command should the administrator issue?
- A. mkps
- B. swapon
- C. chps
- D. mklv
Answer: A
Explanation:
The mkps command creates a paging space and activates it when the system is rebooted. This is explained in the IBM AIX v7 Administrator Specialty Study Guide, under the topic "Creating and Activating a Paging Space".
NEW QUESTION # 32
Which statement is true regarding the snap command?
- A. It collects performance related data.
- B. All options are enabled by default.
- C. By default, it will check there is enough space where the data is to be stored.
- D. The data must be stored in /tmp.
Answer: A
NEW QUESTION # 33
An administrator starts an AIX LPAR and wants to monitor the boot process using the HMC console.
Which command in HMC SSH session lists all managed systems, LPARs on them and offers an easy way to open a console window to an AIX LPAR?
- A. lssyscfg
- B. lsrefcode
- C. mkvterm
- D. vtmenu
Answer: A
Explanation:
According to the IBM AIX v7 Administrator Specialty Study Guide, the lssyscfg command is used to display detailed information about a system configuration. It can also be used to open a virtual terminal session to an AIX LPAR.
NEW QUESTION # 34
What is a benefit of using mksysb to backup a system?
- A. The image contains a backup of all application and user data.
- B. The image contains a backup of all file systems.
- C. The image contains a backup of all volume groups and logical volumes.
- D. The image can be used to restore the rootvg volume group of the system.
Answer: A
NEW QUESTION # 35
......
IBM S1000-007 (IBM AIX v7 Administrator Specialty) certification exam is an excellent way for experienced AIX v7 administrators to validate their skills and knowledge and specialize in this particular area of IT. It is a comprehensive exam that requires a deep understanding of AIX v7 architecture and administration, as well as the ability to apply that knowledge in practical situations.
IBM S1000-007: IBM AIX v7 Administrator Specialty Exam is a professional certification exam that is designed to test the knowledge and skills of candidates who are interested in becoming certified AIX v7 Administrators. S1000-007 exam is designed to provide candidates with a comprehensive understanding of the AIX v7 operating system and its administration.
S1000-007 Exam Dumps, Practice Test Questions BUNDLE PACK: https://www.testpdf.com/S1000-007-exam-braindumps.html
IBM Certification Certification S1000-007 Sample Questions Reliable: https://drive.google.com/open?id=1YyeOpSwHsegJiV28OIOHP4ul81kTmMok
