Free MTCNA Exam Braindumps - New 2022 MikroTik Pratice Exam
Practice Test for MTCNA Certification Real 2022 Mock Exam
NEW QUESTION 24
A client uses a RouterBOARD1000. The clock is configured in '/system clock'. The clock resets to default after each reboot.
Select the best solution for the problem.
- A. Configure '/system ntp server' and set a valid and reachable NTP client address.
- B. Write a script in '/system script' to set the clock
- C. Open the router and ensure the CMOS battery is fine.
- D. Configure '/system ntp client' and set a valid and reachable NTP server address.
Answer: D
NEW QUESTION 25
MikroTik RouterOS commands can be run once a day by:
- A. /system scheduler
- B. /system cron
- C. /system watchdog
Answer: A
NEW QUESTION 26
When backing up your router by using the 'Export' command, the following happens:
- A. The Export file can be edited with a standard text editor after its creation
- B. Winbox usernames and passwords are backed up
- C. You are requested to give the export file a name
Answer: A,C
NEW QUESTION 27
If you wanted to delete the configuration stored in NVRAM, what would you type?
- A. erase startup
- B. erase running
- C. delete nvram
- D. erase nvram
Answer: A
NEW QUESTION 28
Where can you monitor (see addresses and ports) real-time connections which are processed by the router?
- A. Firewall Connection Tracking
- B. Tool Torch
- C. Queue Tree
- D. Firewall Counters
Answer: A,B
NEW QUESTION 29
What are the two main types of access control lists (ACLs)?
Standard
IEEE
Extended
Specialized
- A. 2 and 4
- B. 3 and 4
- C. 1 and 2
- D. 1 and 3
Answer: D
NEW QUESTION 30
What does the firewall action "log" do?
- A. It logs and blocks the packet
- B. It logs the packet
- C. It blocks and logs the packet
- D. It adds a prefix to the packet and passes it through
Answer: B
NEW QUESTION 31
Is it possible to limit how many clients are able to connect to an access point?
- A. Yes, but only with access-lists
- B. Yes
- C. No it's not possible at all
Answer: A
NEW QUESTION 32
Which layer 4 protocol is used for a Telnet connection?
- A. TCP
- B. UDP
- C. TCP/IP
- D. IP
Answer: A
NEW QUESTION 33
Mark all correct answers.
- A. Default-Forwarding could be enabled for a specific clients by wireless access-list
- B. /ip firewall filter allows to deny authentication to AP
- C. The only way to prevent wireless clients connections - disable wireless interface
- D. Wireless access-list could allow and deny connect to your AP
Answer: D
NEW QUESTION 34
Can you manually add drivers to RouterOS in case your PCI Ethernet card is not recognized, and you suspect it is a driver issue?
- A. Yes
- B. No
Answer: B
NEW QUESTION 35
What protocol is used to find the hardware address of a local device?
- A. ARP
- B. ICMP
- C. RARP
- D. IP
Answer: A
NEW QUESTION 36
What is the main reason the OSI model was created?
- A. So application developers can change only one layer's protocols at a time.
- B. To create a layered model larger than the DoD model.
- C. So different networks could communicate.
- D. So Cisco could use the model.
Answer: C
NEW QUESTION 37
RouterOS log messages are stored on disk by default
- A. False
- B. True
Answer: A
NEW QUESTION 38
DHCP server is configured on a router's ether1 interface. IP address 192.168.0.100/24 is assigned to the interface. Possible IP pools, that can be used by this DHCP server, are:
- A. 192.168.0.1-192.168.0.99 , 192.168.0.101-192.168.0.254
- B. 192.168.0.1-192.168.0.14
- C. 192.169.0.1-192.169.0.254
- D. 192.168.0.1-192.168.0.255
Answer: A
NEW QUESTION 39
Which one of the following is true regarding VLANs?
- A. VLANs only work if you have a complete Cisco switched internetwork. No off-brand switches are allowed.
- B. VTP is used to send VLAN information to switches in a configured VTP domain.
- C. Two VLANs are configured by default on all Cisco switches.
- D. You should not have more than 10 switches in the same VTP domain.
Answer: B
NEW QUESTION 40
In MikroTik RouterOS, Layer3 communication between 2 hosts can be achieved by using an address subnet of:
- A. /29
- B. /30
- C. /31
- D. /32
Answer: A,B,D
NEW QUESTION 41
What protocol is used for Ping and Trace route?
- A. DHCP
- B. UDP - trace route
- C. TCP
- D. ICMP - ping
- E. IP
Answer: B,D
NEW QUESTION 42
How many usable IP addresses are there in a 20-bit subnet?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: A
NEW QUESTION 43
If you need to make sure that one computer in your Hot-Spot network can access the Internet without Hot-Spot authentication, which menu allows you to do this?
- A. Walled-garden
- B. IP bindings
- C. Users
- D. Walled-garden IP
Answer: A
NEW QUESTION 44
......
Topics of MikroTik Certified Network Associate (MTCNA) Exam
The syllabus may get updated anytime so it is always recommended to visit the official website of MikroTik or check the updated MTCNA exam dumps to access the latest course contents. The following contents are included in the MikroTik Certified Network Associate (MTCNA) exam:
1. Introduction
This module constitutes of the following subtopics:
- Initial configuration (Internet access)
- First time accessing the router
- RouterOS license levels
- SSH and Telnet
- Package types
- Null Modem cable
- Basic Firewall - NAT masquerade
- Router identity
- Manage RouterOS logins
- RouterBOOT firmware upgrade
- WebFig and Quick Set
- Default configuration
- Resetting a RouterOS device
- WAN DHCP-client
- What is RouterOS
2. DHCP
This module constitutes of the following subtopics:
- Leases management
- DHCP server and client
- DHCP server network configuration
- ARP modes
3. Bridging
This module constitutes of the following subtopics:
- Bridge concepts and settings
- Adding ports to bridges
- Bridge wireless networks
- Bridging overview
4. Routing
This module constitutes of the following subtopics:
- Route flags
- Static routing
- Routing concepts
- Creating routes
5. Wireless
This module constitutes of the following subtopics:
- Frequencies (bands, channels) data-rates / chains (tx power, RX sensitivity, country regulations)
- Default Forward
- Monitoring Tools
- Wireless Security and Encryption
- WPA-PSK, WPA2-PSK
- Registration table
- Connect List
- WPS accept, WPS client
- Snooper
6. Firewall
This module constitutes of the following subtopics:
- Destination NAT
- Firewall principles
- Protection your customers (forward)
- Connection tracking and states
- Basic Address-List
- Protecting your router (input)
- DST-nat and redirect actions
- Filter actions
- Masquerade and src-nat action
7. QoS
This module constitutes of the following subtopics:
- Simple Queue
- Max-limit and limit-at
- Pcq-rate configuration
- Pcq-limit configuration
- Destinations
- Bursting
8. Tunnels
This module constitutes of the following subtopics:
- Creating pool
- PPP status
- IP pool
- PPP settings
- Assigning to a service
- PPP secret
- PPP profile
- PPTP client and a PPTP server (Quick Set)
- PPPoE client
- Point-to-point addresses
- Managing ranges
9. Misc
This module constitutes of the following subtopics:
- Contacting [email protected]
- Network diagrams
- SNMP
- Ping
- Graphs
- Monitoring
- Torch
- Interface traffic monitor
- The Dude
- support.rif, autosupout.rif and viewer
- System logs, enabling debug logs
- Readable configuration (item comments and names)
- Traceroute
Prepare For Realistic MTCNA Dumps PDF - 100% Passing Guarantee: https://www.testpdf.com/MTCNA-exam-braindumps.html
Check the Available MTCNA Exam Dumps with 216 QA's: https://drive.google.com/open?id=1szmEWgFk2u6FQlvnT-oTfCBnA8x0yI_g
