[Mar 02, 2022] Passing Key To Getting JN0-1362 Certified Exam Engine PDF
JN0-1362 Exam Dumps Pass with Updated Mar-2022 Tests Dumps
Juniper JN0-1362 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
Multiple Specializations Offered By Juniper JN0-1362 Exam
The Juniper JN0-1362 Certification exam offers multiple specializations, which include: Networking, Engineering, Security, and Routing Technology. These specializations are designed to test the knowledge of candidates regarding IPv4 and IPv6 networking, IPv4 and IPv6 transport, service, core security, Core routing, network management, MPLS-VPNs, BGP, BSCI, OSPF, CDP. The specialist in Networking, Security, and Routing Technology will be offered a badge called the Junior Specialist, while a Specialist in Engineering will be offered the Senior Specialist Badge. Juniper JN0-1362 exam dumps are made available to candidates who wish to take the certification exam, and we will provide you with a list of all the certifications offered by Juniper Networks.
NEW QUESTION 29
You 2 VPN services to interconnect three of their sites.
- A. In this scenario, what are two functions of the CE device? (Choose two.)
- B. It maintains an MP-BGP session to all other sites to exchange route information for the Layer 2 VPN.
- C. It maintains all customer Layer 3 routing information.
- D. It selects the appropriate circuit on which to traverse the Layer 2 VPN.
- E. It maintains all MPLS LSPs between the sites.
Answer: C,E
NEW QUESTION 30
Your customer's enterprise is adding geographically dispersed branch offices and requires new WAN connections. The primary design consideration for this expansion is low cost.
Which type of WAN connection satisfies the customer's requirement in this scenario?
- A. leased line dedicated circuit
- B. MPLS Layer 3 VPN
- C. transparent Layer 2 service
- D. Internet connection with IPsec
Answer: C
NEW QUESTION 31
A customer wants to use the Internet to connect to a large number of remote sites. They want a solution that is easy to use and one that provides secure connectivity.
Which technology will meet these requirements?
- A. generic routing encapsulation (GRE)
- B. Link Layer Discovery Protocol (LLDP)
- C. equal-cost multipath (ECMP)
- D. Auto Discovery VPN (ADVPN)
Answer: A
NEW QUESTION 32
You are creating a WAN solution design for an enterprise customer. The customer will be connecting three sites in different locations. The customer wants all of the sites to be part of the same Layer 2 network.
In this scenario, what are two valid connection methods that you would provide in your design? (Choose two.)
- A. Layer 2 VPN
- B. Internet WAN
- C. Layer 3 VPN
- D. VPLS
Answer: A,B
NEW QUESTION 33
You are working on a multi-Data Center interconnect (DCI) solution. Your WAN is based upon a multipoint MPLS Layer 3 VPN. This design must provide Layer 2 connectivity between the data centers across your WAN.
Which technology would satisfy the requirement?
- A. VCF
- B. EVPN
- C. VRRP
- D. RTG
Answer: B
NEW QUESTION 34
You are asked to design a DDoS prevention system to help mitigate denial-of-service attacks that target your customers. The management group wants to know the effect FlowSpec may have on current network operations if it is implemented as a solution.
In this scenario which two statements are correct? (Choose two )
- A. FlowSpec can block traffic based on the destination address.
- B. FlowSpec requires Jflow implementation and licensing.
- C. FlowSpec can block traffic based on the source address.
- D. FlowSpec can block traffic based on stateful flow information.
Answer: A,C
NEW QUESTION 35
You are asked to design a Cloud CPE solution that can dynamically add new sites to an existing MPLS Layer 3 VPN. The CPE for each new site must support the service chaining of multiple VNFs.
Which Juniper Networks Cloud CPE solution supports these requirements?
- A. Distributed Cloud CPE - Option 1
- B. Distributed Cloud CPE - Managed Internet
- C. Centralized Cloud CPE
- D. SD-WAN
Answer: A
NEW QUESTION 36
A customer requests that you design their Layer 3 VPN solution so that all site-to-site traffic goes through a central site, in a hub-and-spoke fashion You must choose between using one or two interfaces on the hub WAN link.
In this scenario, which solution would you use?
- A. Use two interfaces on the hub WAN link to reserve one interface for higher Priority traffic.
- B. Use one interface on the hub WAN link to ensure simplicity, since only a single route target is required across the entire Layer 3 VPN.
- C. Use two interfaces on the hub WAN link to allow traffic to go from the spokes to the hub on one interface and from the hub to the spokes on the other interface.
- D. Use one interface on the hub WAN link, since both hub and spoke sites will require a second VRF for route-leaking purposes.
Answer: B
NEW QUESTION 37
Which two statements are correct about Junos Space Connectivity Services Director? (Choose two)
- A. It is used to design and simulate MPLS-TE and LSP routing.
- B. It is used to provide zero touch provisioning (ZTP), which simplifies the deployment of networks by providing policy-driven plug-and-play provisioning and network bring-up operations.
- C. It is used to design, provision, and deploy MPLS-dynamic, RSVP-signaled LSP, and static LSP services on devices.
- D. It is used to design, provision, and monitor Label Discovery Protocol (LDP) and Border Gateway Protocol (BGP) services on devices
Answer: B,C
NEW QUESTION 38
Exhibit.
Referring to the exhibit considering shared fates, which Internet Transit?
- A. Customer A
- B. Customer C
- C. Customer D
- D. Customer B
Answer: D
NEW QUESTION 39
You are designing an MPLS-based network overlay for your environment that use either LDP or RSVP-signated LSPs.
Which two statements are true about these two signaling technologies (Choose two.) Which two statements are true about these two signaling technologies? (Choose two.)
- A. RSVP enables an administrator to configure different traffic types to take different paths across the MPLS network.
- B. LDP uses EROs to influence the path of an LSP and enable traffic engineering.
- C. RSVP requires the traffic engineering database (TED) to find the best path across the network.
- D. LDP leverages the IGP to find the best path across the network.
Answer: A,D
NEW QUESTION 40
Which statement is correct about learning remote host MAC addresses when your DCI is based on EVPN?
- A. Control plane MAC learning by the provider edge (PE) device
- B. Data plane MAC learning by the provider edge (PE) device is performed.
- C. No MAC learning by the provider edge (PE) device is performed
- D. Static MAC configuration on the provider edge (PE) device is perform
Answer: B
NEW QUESTION 41
A new customer asks that you extend their LAN across your WAN The customer wants to retain administrative control over all routing in their network.
Which two architectures would meet this requirement? (Choose two.)
- A. VPLS
- B. public Internet
- C. Layer 2 VPN
- D. Layer 3 VPN
Answer: A,C
NEW QUESTION 42
A customer wants to consolidate all remote site connections into a single enterprise WAN for backhual to the corporate headquarters and data centers.
Which solution satisfies this requirement?
- A. Internet edge
- B. private WAN
- C. WAN aggregation
- D. Data Center Interconnect
Answer: D
NEW QUESTION 43
Your customer's enterprise is adding geographically-dispersed branch offices and requires new WAN connections. The primary design consideration for this expansion is low cost but the branches must remain secure with low latency.
Which type of Internet access model satisfies the customer's requirement in this scenario?
- A. centralized model with security at the hub
- B. distributed model with security at each branch
- C. distributed model with security at the hub
- D. centralized model with security at each branch
Answer: B
NEW QUESTION 44
You are designing several MPLS virtual routing and forwarding (VRF) instances on all provider edge (PE) routers. Routes within each VRF should be exchanged between all PE routers provisioned for that VRF.
For each VRF routing instance which two attributes must match on all related PE routers? (Choose two )
- A. router ID
- B. interfaces
- C. VRF target
- D. instance type
Answer: C,D
NEW QUESTION 45
Which RFC standards-based feature allows for customer-specific configuration parameters to be passed between RADIUS and a BRAS?
- A. vendor-specific attributes
- B. LSA
- C. DHCP options
- D. DHCPv6 options
Answer: A
NEW QUESTION 46
Since deploying VPLS, you notice an unusually high level of traffic In your nine topology. On further inspection, you determine that broadcast traffic is causing the problem. The traffic is legitimate. Nevertheless, you are asked to look into options that allow the network to scale.
In this scenario, what would you do to solve the problem?
- A. Move from LDP-signaled VPLS to BGP-signaled VPLS.
- B. Add a broadcast policer and an unknown unicast policer to each VPLS.
- C. Mark broadcast traffic with a high drop priority.
- D. Deploy P2MP LSPs.
Answer: D
NEW QUESTION 47
Which Juniper Networks platform automates the orchestration of compute, storage, and networking resources to create and manipulate OpenStack clouds?
- A. WANDL
- B. NorthStar
- C. Contrail
- D. RingMaster
Answer: C
NEW QUESTION 48
Which security implementation does Juniper Networks recommend for all core routers in a service provider network?
- A. application firewall
- B. unified threat management
- C. stateless loopback firewall filter
- D. intrusion and detection prevention
Answer: C
NEW QUESTION 49
You are designing a new service provider network and need to select a label distribution mechanism that guides certain types of traffic along specific paths within the network.
Which two label distribution mechanisms would satisfy the requirements? (Choose two.)
- A. RSVP
- B. BGP-LU
- C. segment routing
- D. LDP
Answer: A,D
NEW QUESTION 50
......
JN0-1362 exam questions for practice in 2022 Updated 130 Questions: https://www.testpdf.com/JN0-1362-exam-braindumps.html
