[Oct 28, 2021] Pass ISQI CTAL-TAE Exam Info and Free Practice Test
CTAL-TAE Exam Dumps PDF Updated Dump from TestPDF Guaranteed Success
ISQI CTAL-TAE Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 10
Consider a TAS that exclusively uses the APIs of a SUT. To make this work, significant changes have been required to the SUT by adding a set of dedicated test interfaces to the APIs. All the automated tests will use these test interfaces when interacting with the SUT. Assume that you are currently verifying the correctness of the automated test environment and test tool setup.
Which of the following would you expect to be the MOST specific risk associated with this scenario?
- A. The automated test cases will not contain the expected result
- B. The connectivity from the TAS to the dedicated test interfaces will not work
- C. False alarms, that are unlikely to occur in the real world, will be observed during testing
- D. The process of configuring the TAS will be error-phone due to manual intervention
Answer: B
NEW QUESTION 11
You are reviewing the testability of your SUT.
Which of the following BEST refers to the characteristic of OBSERVABILITY?
- A. The ability of the SUT to prevent unauthorized access to its components or data.
- B. The abilityto identify states, outputs, intermediate result and error messages in the SUT
- C. The ability to exercise the SUT by entering inputs, triggering events and invoking methods
- D. The ability of the SUTto perform its intended function for a specified period of time
Answer: B
NEW QUESTION 12
You are executing the first test run of a test automation suite of 200 tests. All the relevant information related to the state of the SUT and to the automated test execution is stored in a small database. During the Automated test run you observe that the first 10 test pass, while an abnormal termination occurs when executing the
11thtest. This test does not complete its execution and the overall execution of the suite is aborted. An immediate analysis of the abnormal termination is expected to be time consuming and you have been asked to produce a detailed report of the execution results for the first test run, as soon as possible.
What is the MOST important FIRST step to be taken immediately after the abnormal occurred when executing the 11thtest?
- A. Take a backup of the database in its current state. So It can be analyzed later
- B. Re-run the test automation suite starting from the 12thtest
- C. Re-run the test automation suite starting from the 1sttest.
- D. Return the database to a consistent state that allows subsequent test to run
Answer: A
NEW QUESTION 13
A defect in a SUT has been resolved and validated by an automated defect re-test in the current release of the software. This retest has now been added to the automated regression test suite.
Which statement BEST describes a reason why this defect could re-occur in future releases?
- A. The automated regression test suite has a narrower scope of functionality
- B. The automated regression test suite is not run consistently for future releases.
- C. Theconfiguration management process does not properly control the synchronization between software archives
- D. Automated defect confirmation testing is not effective at confirming that the resolved defect will continue to work in future releases
Answer: C
NEW QUESTION 14
A project consists of distributed teams working in a 24-hour environment, where activities happen at all hours of the day. This project adopts a CI (Continuous Integration) process when developer check-in code and consists of automated activities that include generating a build and deploying it to a test environment.
Automated integration tests are run multiple times a day. The project have asked for a report containing the automation test results for every build, which must be available 24/7 to the project team.
Which of the following would be the BEST way to automatically provides this report?
- A. Store the execution result of the integration tests for the last build to a database (overwriting the results from the previous build), automatically create atest execution report for this build send It via e-mail to the project team
- B. Store the execution results of the integration tests for the last build to a database (without overwriting the results from the previous builds). Automatically create a test execution report for this build and send it via e-mail to the project team
- C. Store the code coverage results of the integration tests for the last build to a database (without overwriting the results from the previous builds). And automatically create a chart showing the trend in code coverage and send via email to the project team.
- D. Store the execution results of the integration tests for the last build to a database (without overwriting the results from the previous builds), use this database to automatically update a dashboard containing the build history and test results accessible to the project team.
Answer: D
NEW QUESTION 15
Which of the following statements about the reuse of TAS artefacts is TRUE?
- A. Reusable TAS artefacts can include components (or parts of components) associated with different layers of the TAA
- B. To enable reuse of TAS artefacts, a good design for reuse is built into the TAA and to further action are needed during the TAS lifecycle
- C. Communications maintenance and improvements for reusing TAS artefacts are modify addressed during the design of the TAA
- D. Reusable TAS artifacts associated with the definition layer of the TAA include the adaptors to the SUT components and/or interfaces
Answer: A
NEW QUESTION 16
As a TAE you are evaluating a functional test automation tool that will be for several projects within your organization. The projects require that tool to work effectively and efficiently with SUT's in distributed environments. The test automated tool also needs to interface with other existing test tools (test management tool and defect tracking tool.) The existing test tools subject to planned updates and their interface to the test automated tool may not work property after these updates.
Which of the following are the two LEAST important concerns related to the evaluation of the test automation in this scenario?
* Is the test automation tool able to launch processors and execute test cases on multiple machines in different environments?
* Does the test automation tool support a licensing scheme thatallows accessing different sets?
* Does the test automation tool have a large featureset, but only part of the features will be sets?
* Do the release notes for the planned updates on existing specify the impacts on their interfaces to other tools?
Does the test automation tool need to install specific libraries that could impact the SUT?
- A. A and C
- B. A and E
- C. B and E
- D. C and D
Answer: C
NEW QUESTION 17
Your goal is to verify completeness, consistency and correct behavior of an automated test suite. The TAS has been proven to successfully install in the SUT environment. All the preliminary checks to verify the correct functioning of the automated test environment and test tool configuration, installation and setup have successfully completed.
Which of the following is NOT a relevant check for achieving your goal in this scenario?
- A. Checking whether all the test cases produce repeatable outcomes
- B. Checking whether all the test cases contain the expected results
- C. Checking whether the post condition have been fulfilled for all the test cases
- D. Checking whether theloading of the TAS is repeatable in the SUT environment
Answer: A
NEW QUESTION 18
Consider a TAS that is going to be deployed for the first time. The TAS requires share resources and run it its own test environment. The infrastructure for the TAS has been created along with maintenance procedures. It is very unlikely the TAS will be required to work in other target Environments. There is a high-risk that when the TAS is deployed in its own test environment, a number of existing application will no longer work because of conflicts with the existing shared resources.
Which of the following activities would you expect to be MOST effective at mitigating the risk associated with the first deployment of the TAS?
- A. Testing the TAS for its ability to be implemented in other target test environments.
- B. Testing the TAS for ITS ability to run a shared test environment
- C. Testing the TAS for application compatibility issues in the target environment
- D. Testing the TAS for regressions due to optimization that fix non-functional issues.
Answer: A
NEW QUESTION 19
Consider A TAS for testing a desktop application via its GUI. All the test cases of the automated test suite contain the same identical sequences of steps at the beginning (to create the necessary objects when doing a preliminary configuration of the test environment and at the end (to remove everything created -specifically for the test itself during the preliminary configuration of the test environment). All automated test cases use the same set of assertion functions from a shared library, for verifying the values in the GUI fields (e.g text boxes).
What is the BEST recommendation for improving the TAS?
- A. Improving the architecture of the application in order to improve its testability
- B. Implementing keywords with higher level of granularity
- C. Implementing standard setup and teardown functions at test case level
- D. Adopting a set of standard verification methods for use by all automated tests
Answer: B
NEW QUESTION 20
Which of the following BEST describes why it is important to separate test definition from test execution in a TAA?
- A. It allow choosing different paradigms (e.g event-driven) for the interaction TAS and SUT
- B. It allows specify test cases without being closely tied to the tool to run them against the SUT
- C. It allows developing steps of the test process without being closely tied to the SUT interface.
- D. It allows testers to find more defects on the SUT
Answer: D
NEW QUESTION 21
You are using a gTAA to create a TAS for a project. The TAS is aimed specifically at automating a suit of existing manual test cases for standalone desktop applications. All the interfaces between the TAS and SUT will be from the CUI of the application.
Which of the following layers of the gTAA should you focus on for the TAS?
- A. The Test Execution layer
- B. The Test Adaption layer
- C. The test Generation layer
- D. The Test Definition layer
Answer: C
NEW QUESTION 22
A TAS uses a commercial test automation tool and the default logs generated by the inconsistent formats such as different types of messages (pass/fail steps, screenshots, warnings, etc.) To solve this issue some custom logging functions have been created from the test scripts, making it possible to log the different types of messages with the same format. However, this may cause a problem due to excessive size of the logs which can make it difficult to find the required information. Assume that all the default logs will be disabled when running the automated tests and that some tests will not generate excessively sized logs.
Which of the following represents the BEST suggestion for implementing the custom logging functions?
- A. Implement the custom logging functions without saving stack traces
- B. Implement the custom logging functions without saving timestamps
- C. Implement the custom logging functions to support different levels of tracing
- D. Implement the custom logging functions to redirect the logs to multiple files
Answer: C
NEW QUESTION 23
Which of the following statements BEST describe aspects of the SUT to consider when designing a TAA?
- A. All the interface of the SUT affected by the tests should be controllable by the TAA
- B. All the internal test interfaces of the SUT should be removed prior to the product release
- C. All the external test interfaces of the SUT should be removed prior to the product release
- D. All the interaction between SUT and TAS should be logged with the highest level of detail
Answer: D
NEW QUESTION 24
A defect in a SUT has been resolved and validated by an automated defect re-test in the current release of the software. This retest has now been addedto the automated regression test suite.
Which statement BEST describes a reason why this defect could re-occur in future releases?
- A. The automated regression test suite has a narrower scope of functionality
- B. The configuration management process does not properly control the synchronization between software archives
- C. The automated regression test suite is not run consistently for future releases.
- D. Automated defect confirmation testing is not effective at confirming that the resolved defect will continue to work in future releases
Answer: C
NEW QUESTION 25
Consider a TAS associated to dynamically changing software frequent releases. Your goal is to determine the amount of effort required to maintain the automated tests of the regression test suite for each new release of the SUT.
What is the MOST important metric to collect to achieve your goal?
- A. The time it takes to execute all the automated tests, for each new release of the SUT.
- B. The number of automated tests which fail because of a single software defect, for each new release of the SUT
- C. The code coverage achieved with the automated tests, for each new release of the SUT
- D. The number of automated tests requiring maintenance, for each new release of the SUT.
Answer: B
NEW QUESTION 26
Which of the following statement about the implementation of automated regression testing is FALSE?
- A. When automating regression tests, the structure of automated tests mustalways be the same as the corresponding manual tests
- B. When automating regression tests, theinitialization steps set the test preconditions should be automated wherever possible
- C. When automating regression tests, consideration should be given to how much time would be saved by automation
- D. When automating regression tests, the corresponding manual tests should have already been executed to verify they operate correctly
Answer: C
NEW QUESTION 27
Consider a SUT that small run on multiple platform during the execution of automated test runs. In each test run an automated test suite needs to be executed, with the same version of the TAF, against the sameversion of the SUT of each platform. Each platform shall have its own dedicated test environment. Your goal is to implement a process as automated as possible ( i.e with minimal manual intervention) that allows implementing a consistent setup of the TAS across the multiple test environments.
Which two of the following aspects are MOST relevant for achieving your goal in this scenario?
* The configuration of the TAS uses automated installation scripts
* The TAF saves the logs needed to debug errors in XML format
C) Features of the TAF not used by the automated tests have been tested D) All the automated test cases contain the expected results E) The TAS components are under configuration management
- A. B and c
- B. A and d
- C. A and e
- D. B and d
Answer: C
NEW QUESTION 28
You are working on a TAS forstandaloneapplication. The automated tests are developed based on a automation framework that allows interaction with GUI elements using on object orientated API. The GUI elements includemenus, buttons, radio buttons, text toolbars and their properties.
Whilst automating a test, you have discovered that the GUI elements of some third party components are not identifiable by the automated tool you are using.
Which of the following is the FIRST step that you take to investigate this issue?
- A. Adopt an approach that uses the coordinates of the GUI elements instead
- B. Verify the testability support with the providers of the third party components
- C. Verify whether the GUI identification depends on the browser.
- D. Verify whether naming standards for variables and have been defined for the current automation solution
Answer: A
NEW QUESTION 29
......
Pass Your ISQI Exam with CTAL-TAE Exam Dumps: https://www.testpdf.com/CTAL-TAE-exam-braindumps.html
CTAL-TAE Exam Dumps - ISQI Practice Test Questions: https://drive.google.com/open?id=1YvDgUnjN4-tnnZev_hNb-YaS7mdML7Wr
