[Nov 11, 2024] JN0-363 Exam Dumps 100% Same Q&A In Your Real Exam
JN0-363 Test Engine Dumps Training With 293 Questions
NEW QUESTION # 132
Click the Exhibit button. Which two topologies shown in the exhibit could be implemented without a spanning-tree protocol? (Choose two.)
- A. star
- B. tree
- C. mesh
- D. ring
Answer: A,B
NEW QUESTION # 133
Click the Exhibit button.
You have applied the policy shown in the exhibit to the forwarding table on an MX Series device.
How is traffic load-balanced?
- A. per flow
- B. per segment
- C. per packet
- D. per frame
Answer: C
NEW QUESTION # 134
Click the Exhibit.
Referring to the configuration in the exhibit, which two statements are true? (Choose two.)
- A. The next-hop 172.16.1.2 must respond to ping commands for the route 192.168.5.0/24 to be active.
- B. The next-hop 172.16.1.2 must be directly connected to the router for route
- C. The next-hop 172.16.1.2 must be part of an active route in route table inet 0 for route 192.168.5.0/24 to be active.
- D. The next-hop 172.16.1.2 must be active in route table inet 3 for the route 192.168.5.0/24 to be active.
Answer: B,C
NEW QUESTION # 135
By default, the Junos OS advertises which address(es) in LDP forwarding equivalency class (FEC) messages?
- A. all router addresses
- B. all transit interfaces
- C. primary transit interface address
- D. loopback address
Answer: D
NEW QUESTION # 136
What happens when a packet matches a static route with the next hop parameter set to reject?
- A. The system silently drops the packet
- B. The packet is forwarded and the packet is marked as rejected in the header
- C. An ICMP message is sent to the source and the packet is dropped
- D. An ICMP message is sent to the source and the packet is forwarded
Answer: C
Explanation:
https://www.informit.com/articles/article.aspx?p=30666&seqNum=5
NEW QUESTION # 137
Click the Exhibit.
You have configured the IBGP group shown in the exhibit. However, committing your configuration fails.
Which parameter should you add to the IBGP group configuration to correct the problem?
- A. Type internal
- B. Type external
- C. Export <policy name>
- D. As -override
Answer: A
NEW QUESTION # 138
Exhibit
Referring to the exhibit, what is the minimum number of LSPs required to support alt four networks?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Given the RSVP Signaled Service Provider MPLS Core network shown in the exhibit, only a single Label Switched Path (LSP) is required to support all four networks because MPLS can use label stacking to multiplex multiple LSPs over a single physical path. Therefore, one LSP can be established through the MPLS core, and all networks can use this LSP with different label stacks.References:
MPLS Fundamentals, Juniper Networks Documentation
RSVP-TE Signaling, Juniper Networks Documentation
NEW QUESTION # 139
You want the R1 and R3 routers to forward traffic destined to the 203.0.113.0/24 network through R2. Which BGP attribute would you modify to satisfy this requirement?
- A. origin
- B. local preference
- C. community
- D. MED
Answer: D
NEW QUESTION # 140
Which two statements are true about NSR? (Choose two.)
- A. NSR requires graceful restart to function properly
- B. NSR requires only one RE.
- C. NSR requires redundant REs.
- D. NSR requires GRES to function properly.
Answer: C,D
NEW QUESTION # 141
Click the Exhibit button. In the exhibit, all routers are sending routes to Router B
Which routes will be advertised from Router B to Router D?
- A. BGP routes learned from Routers A, C and E only
- B. BGP routes learned from Routers A and C only
- C. BGP routes learned from Router E only
- D. BGP routes learned from Router A only
Answer: A
NEW QUESTION # 142
Click the Exhibit button.
The routers shown in the exhibit are configured for segment routing.
In this scenario, what is the adjacency SID that Router B advertises to Router A?
- A. 10.1.1.1
- B. 10.1.1.2
- C. 0
- D. 1
Answer: D
Explanation:
The diagram you provided shows two routers, Router A and Router B, with MPLS labels between them. In the context of segment routing with MPLS, each router advertises a set of SIDs (Segment Identifiers). These SIDs can be node SIDs, which are associatedwith the router itself, or adjacency SIDs, which are associated with the links between routers.
Given the information from the exhibit:
Router A has a Router ID of 10.1.1.1 and is associated with the MPLS label 11.
Router B has a Router ID of 10.1.1.2 and is associated with the MPLS label 12.
The adjacency SID in segment routing is used to identify a specific adjacency between two routers. In this case, the question is asking for the adjacency SID that Router B advertises to Router A. This would be the label that Router B tells Router A to use to send packets directly to Router B over their shared adjacency.
So, the adjacency SID that Router B advertises would be associated with the link that Router A would use to send traffic to Router B, which is labeled with the number 12 in the exhibit.
Therefore, the answer to the question is:
D). 12
This is the label that packets would carry when being sent from Router A to Router B to identify the specific adjacency between the two routers in the context of segment routing.
NEW QUESTION # 143
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Interface xe-0/0/0.0 can only form a single adjacency
- B. Interface ge-3/0/0.0 has a default metric of 10
- C. Interface xe-0/0/0.0 has a default metric of 10
- D. Interface ge-1/0/0.0 can only form a single adjacency
Answer: D
NEW QUESTION # 144
You are bringing a new network online with three IS-IS routers using default Junos election priorities. The routers are configured as Level 2 only IS-IS routers. Which statement is true about the DIS election in this scenario?
- A. The router with the lowest MAC address will be elected as the DIS.
- B. The router with the highest numerical lo0 IP address will be elected as the DIS.
- C. The router with the lowest numerical lo0 IP address will be elected as the DIS.
- D. The router with the highest MAC address will be elected as the DIS.
Answer: B
NEW QUESTION # 145
An OSPF router does not have a router ID configured.
In this scenario, which statement is correct about the router ID?
- A. The Junos OS will use the IP address assigned to the interface with the lowest MAC address.
- B. The Junos OS will use the IP address assigned to the Interface with the highest priority.
- C. A router ID will not be assigned until it is manually configured.
- D. The Junos OS will use the IP address assigned to the loopback interface for the router ID.
Answer: D
Explanation:
The router identifier is used by BGP and OSPF to identify the routing device from which a packet originated. The router identifier usually is the IP address of the local routing device. If you do not configure a router identifier, the IP address of the first interface to come online is used. This is usually the loopback interface. Otherwise, the first hardware interface with an IP address is used
NEW QUESTION # 146
What are two characteristics of a traditional Ethernet LAN? (Choose two.)
- A. Nodes share a physical medium.
- B. Nodes can successfully transmit simultaneously.
- C. Nodes use a step-up algorithm when collisions are detected.
- D. It consists of a single broadcast domain.
Answer: A,D
NEW QUESTION # 147
Click the Exhibit.
Referring to the exhibit, what is the result of applying this policy?
- A. The 172.18.1.0/24 prefix will be redistributed into OSPF as an internal route.
- B. The 172.18.1.1/32 prefix will be redistributed into OSPF as an internal route.
- C. The 172.18.1.1/32 prefix will be redistributed into OSPF as an external route.
- D. The 172.18.1.0/24 prefix will be redistributed into OSPF as an external route.
Answer: D
NEW QUESTION # 148
......
JN0-363 Practice Test Pdf Exam Material: https://www.testpdf.com/JN0-363-exam-braindumps.html
JN0-363 Questions Pass on Your First Attempt Dumps for JNCIS-SP Certified: https://drive.google.com/open?id=1apotMY3ileYOMNCBKgoX1-sovkVUMFCU
