[Nov-2021] Updated VMware SD-WAN Troubleshoot 2021 5V0-41.20 Exam Questions BUNDLE PACK
Master The VMware Content 5V0-41.20 EXAM DUMPS WITH GUARANTEED SUCCESS!
NEW QUESTION 15
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing; internal and external applications.
Exhibit.
A network administrator is configuring several branches to prefer a single prefix, 10.20.11.0/24, from the Seattle hub over the New York hub for various application performance reasons.
What are two effective ways the administrator can accomplish this? (Choose two.)
- A. Modify the AS Path in New York to be longer for 10.20.11.0/24.
- B. In the hub preferred order in the profile, set the Seattle hub to be preferred over New York.
- C. In the OFC 10.20.11.0/24, modify the preferred exit point to be Seattle and pin the route.
- D. Modify the AS Path in New York to be shorter for 10.20.11.0/24.
Answer: B,C
NEW QUESTION 16
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot gel to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A business policy is created and saved.
How can the network administrator verify the business policy is working?
- A. Select a VCE > Test & Troubleshoot > Remote diagnostics and select List Active flows and check the flows to see what Business policy is applied under the Business policy column.
- B. Check under the Monitor > Business Priority tab for Business policy statistics.
- C. Check under Monitor > Applications tab and check the listing of applications at the bottom of the screen and the category of the type of traffic there.
- D. Executing Route table dump under VCE > Test St Troubleshoot > Remote Diagnostics and select Route Table dump and look for business policy applied in the Route table Dump stats.
Answer: D
NEW QUESTION 17
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator is trying to create multiple overlays on a single physical interface on an Edge. The administrator is able to bring up only a single overlay so far, but is having trouble with bringing up additional overlays.
What could be the possible reason?
- A. The administrator does not have the right permission to create multiple overlays. The administrator needs to have an Operator-level privilege for this task.
- B. Multiple overlays cannot be created on a single physical interface. Multiple physical interfaces are needed.
- C. On the WAN overlay configuration, verify the IP address, next-hop, and the VLAN ID configuration.
- D. The licensing does not support multiple overlays on a single physical interface.
Answer: D
NEW QUESTION 18
Scenario 3:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
The network administrator determines that dynamic routes to SD-WAN sites are missing at the San Jose branch router. The network administrator decides to look into the configurations of hub Edges. All SD-WAN branch sites must use a hub to communicate with the San Jose site. Best practices have been implemented at these SD-WAN sites.
Where should the administrator check first to verify if the configuration is correct?
- A. Verify the static routes to San Jose from all Branches are configured.
- B. Verify that the NVS feature is enabled in Cloud VPN.
- C. Verify that redistribution between the primary hub site and San Jose is enabled.
- D. Verify that redistribution at the Dallas Hybrid Site is enabled for San Jose to use as a peering point.
Answer: A
NEW QUESTION 19
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users at a remote office are complaining about poor performance with certain applications. The network administrator has already configured Business Policies based on these requirements.
What is the sequence of parameters that the administrator can check to troubleshoot this problem? (Choose two.)
- A. Check underlay network (bandwidth, latency, jitter, packet loss).
- B. Review Business Policies configuration and match them against the business requirements.
- C. Change the bandwidth measurement under WAN Overlay Advanced Settings.
- D. Under Monitor, check Routing tab.
Answer: A,D
NEW QUESTION 20
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator is investigating connectivity issues between Chicago and San Jose. The administrator browses to the Overlay Flow Control (OFC) window and notices that the screen is blank with no routes shown in the OFC.
What is a possible reason for this?
- A. There is an invalid MTU configuration at Chicago.
- B. Cloud VPN for the Edges / Profiles is not enabled.
- C. OSPF or BGP is not enabled.
- D. The routing table on the Edges has not been initialized.
Answer: B
NEW QUESTION 21
Scenario 1:
The Dallas Branch location is having issues getting activated. The local network administrator is aware that the Edge device received a DHCP address and was able to connect to the internet. The Orchestrator is reporting the Edge as Down. No other changes were made post activation.
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is am Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Refer to the Exhibit(s).
What is the cause of this issue?
- A. The activation link contained incorrect configurations for WAN overlays and WAN interfaces.
- B. The Edge will be offline for about 4 hours until it has completed the factory image installation.
- C. The activation link did not contain any post-activation configuration to allow the Orchestrator to communicate with the Edge.
- D. The activation link did not specify the updated image location requiring the Edge to be re-activated.
Answer: D
NEW QUESTION 22
Scenario 1:
A network administrator is tasked with enabling SO-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
After the network administrator has determined the problem with the Edge not being able to access the Internet, the administrator receives another error stating that the SD-WAN Orchestrator is still not reachable.
The VCO's address is Amer-vcoOl.velocloud.net.
Refer to the Exhibit(s).
What might be disallowing the Edge to communicate with the Orchestrator?
- A. The local firewall that the Edge uses to reach externally is blocking UDP Port 53 in both directions.
- B. The SD-WAN Orchestrator specified is incorrect, and a new activation email needs to be sent.
- C. The SD-WAN Orchestrator is not being resolved for DNS.
- D. The SD-WAN Orchestrator has a limited 60-second window for the Edge to come online.
Answer: D
NEW QUESTION 23
Scenario 2:
After completing the branch activation for all required branches, the network administrator attempts to test connectivity between the various branches and between hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the some applications they are accessing.
Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A technician has added Edges to an East Coast Profile. These Edges are not able to communicate via dynamic tunnels to Edges in the West_Coast profile. The technician has noticed that some Edges are able to establish dynamic tunnels.
What could be preventing Edges from being able to establish dynamic tunnels?
- A. The profiles are configured to only allow dynamic branch to branch for Edges within the same profile.
- B. None of the existing profiles have Cloud VPN enabled thus preventing dynamic tunnels.
- C. The profiles are not configured to allow dynamic branch to branch VPNs.
- D. Neither profile has been configured to utilize cloud gateways.
Answer: C
NEW QUESTION 24
Scenario 1:
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Exhibit.
The network administrator determines the issue preventing the Dallas Branch from coming online.
Refer to the Exhibit(s).
What must the administrator do for the Edge to communicate with the Orchestrator and other branches?
- A. Create a User-defined WAN Overlay to bond both interfaces
- B. Delete the User Defined WAN Overlays as the Orchestrator will discover these automatically on MPLS and Internet
- C. Update the Orchestrator to the latest version as it enables "Auto WAN Swapping"
- D. Reverse the WAN Overlay configurations
Answer: B
NEW QUESTION 25
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users at a remote office are complaining about poor performance with certain applications. The network administrator has already verified the configuration is correct.
Which two parameters should the administrator review to troubleshoot this issue? (Choose two.)
- A. Change the bandwidth measurement under WAN Overlay Advanced Settings
- B. Check the flows to verify which Business Policy the traffic of interest is matching
- C. Look under Monitor, check Business priority tab
- D. Check the underlay network (bandwidth, latency, jitter, packet loss)
Answer: C,D
NEW QUESTION 26
Scenario:1
A network administrator is tasked with enabling SD-WAN at three branch locations, A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center in this environment as well. Please refer to the topology.
Exhibit.
One of the Edges at the Chicago site is unable to activate. The Edge has a red LED. What is the next troubleshooting step?
- A. If the Edge is connected to its HA peer, determine if underlay BGP peering is present between the two Edges.
- B. If the Edge is connected to the MPLS circuit which does not have DHCP, determine if there is a static IP configuration that needs to be applied upon activation.
- C. If the Edge is connected to its HA peer, determine if there is a link-light on the HA peer-link.
- D. If the Edge is connected to the MPLS circuit, determine if the Hub is advertising gateway routes.
Answer: D
NEW QUESTION 27
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present- The network administrator is informed (hat during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Which metrics can a network administrator verify in the QoE screen to determine the overall health of Underlay and Overlay?
- A. Jitter, Speed, Latency.
- B. Packet Loss, Latency, Speed.
- C. Jitter Packet Loss, Speed.
- D. Jitter, Packet Loss, Latency.
Answer: A
NEW QUESTION 28
Scenario 1:
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of lime. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Exhibit.
When attempting to activate an Edge, after clicking on the "activation link" in the email that was sent to the network administrator, the Edge's local UI shows as "Internet down". This is preventing the Edge from coming online and being activated. When referring to the output, the network administrator notices that the Edge has received DHCP addressing.
What could be preventing the Edge from coming online?
- A. The Edge's profile does not specify the correct Edge Model.
- B. Cloud VPN is not enabled in the AMER Branch profile.
- C. The next hop does not respond to ICMP pings.
- D. The subnet mask assigned to the Edge is incorrect.
Answer: A
NEW QUESTION 29
......
VMware 5V0-41.20: VMware vSAN 6.7 Specialist Exam Certified Professional salary
The average salary of a 5V0-41.20: VMware vSAN 6.7 Specialist Exam Certified Expert in
- United State - 100,200 USD
- England - 75,000 POUND
- Europe - 70,500 EURO
- India. - 14,00,327 INR
Pass VMware 5V0-41.20 Exam – Experts Are Here To Help You: https://www.testpdf.com/5V0-41.20-exam-braindumps.html
Get Latest VMware SD-WAN Troubleshoot 2021 5V0-41.20 Practice Test For Quick Preparation: https://drive.google.com/open?id=1UgMfjXikPxEJbkro6JacnVD74WwlYZh3
